Abstract: - In recent years, there are several problems encountered in waste management system particularly waste tyre as well as coals. The energy generation on incineration provides large amount of polycyclic aromatic hydrocarbon (PAH) emissions which is the cause of major environmental threat. Therefore, the combustion of coal and tyre were carried out in cement industry in order to generate heat energy at 1300^oC and the only remaining residue (steel powder) to enhance the strength of the cement. At the outset, the particle size of coal and tyre was cut into 63-75 and 180-212 µm respectively. Combustion experiments were conducted using Nelson reactor under controlled conditions in presence of air and also in presence of nitrogen gas (INOX) atmosphere. The temperature range was varied from 300-1300⁰C and several fuel mass loading in the furnace, expressed in terms of bulk equivalence ratios in the range of 0.7-2.4. At fixed bulk equivalence ratios, as the furnace gas (Air) temperature increased the polycyclic aromatic hydrocarbon yields from both fuels decreased drastically, while the CO₂ yields increased. At the highest temperature around 1300⁰C, the effluent of combustion of both (coal and tyre) fuels was practically devoid of polycyclic aromatic hydrocarbon (PAH) (at a detection limit of 0.3 µg of a PAH component/g of fuel burnt). In order to understand the rate of thermal effect and morphology of co combustion material (coal and tyre), the preliminary results are very essential to explore. Therefore, the thermo gravimetric analysis (TGA) and environmental scanning electron microscopy (ESEM) were carried out and results of coal and tyre mixture at various temperature conditions will be highlighted.

Keywords: Environmental Emission, Cement Industry, Carbon dioxide, polycyclic aromatic hydrocarbon (PAH), Nelson reactor.