Three-point bending load, the flexural performance of Glass/Epoxy laminate specimens has been successfully measured often with artificial flaws of various geometric patterns and three separate sizes placed at different places. The present work is aims to determine the optimum ply angle and to study the behavior of composite material under various loading condition likely to be flexural performance both experimental and analytical using Ansys. Film defects were created on the laminated at obituary location. Laminates are prepared using GFRP material and three point bending test was performed to study the results.
Investigation the Flexural Characteristics of GFRP Composite Laminate with Artificial Delamination
59 views
4 Downloads